|
Current |
|
Current EDM is a leading supplier of high-speed EDM drilling machines. Built completely in Japan, Current EDM continues its commitment to design and develop the most reliable, cost effective and technically advanced line of EDM drilling machines. MT Series - Adapts a machine tool into a versatile EDM drilling machine. |
EDM DRILLING MACHINES |
|
Automatic Electrode Changer |
|
Current EDM has developed an Automatic Electrode Changer option for their models CT300 and CT500 CNC EDM Drills. With a compact carousel and unique design specifically for EDM drilling, the 24 station changer extends machine up-time. Together with the tool changer, Current EDM has developed a companion Automatic Electrode Guide Changer. It will reliably change up to 4 different diameter guides as often as required by specific job requirements. These new devices, coupled with Current EDM's proven CNC technology, reduce operator attention and enable high volume, unattended drilling. |
|
MT-40S |
|
The EDMDrill, MT40S adds the extra dimension of EDM drilling to your manual CNC milling machine. The MT40S will handle such difficult applications as drilling small diameter holes through hardened alloys, vent holes in molds, and start holes in tungsten carbine for wire EDM. All these tasks can be performed at high speeds, without limiting your milling capacity. The MT40S is a great solution for EDM drilling in both large, awkward parts and in advanced materials. Mount and surface index units for production work or "fixture" the head for horizontal burning. Effectively drill holes with electrode diameters from .004" to .256" using economical water dielectric fluid. |
|
CT-500F |
|
Current EDM continues to set the industry standard with the CT-300F. This model drills deep, angled holes in hardened alloys using electrodes .004" - .256" in diameter. A tough and powerful compact unit, the CT300 will add flexibility to your shop. The controller allows you to program off-line, upload files, reduce setup time, and improve accuracy with automatic part referencing. Offering 57 peak amps, and the user friendly control programs 5-axes, giving you 9 coordinate systems, canned cycle routines, and electrode wear compensation cycles for blind hole applications.
|
|
CT-300F |
|
The CT500S is a medium capacity CNC EDM drilling machine specifically designed for production drilling of complex parts that require multi-axis positioning. Together with its proven electrode changer and integrated tilt-rotary table, the CT500S delivers consistent hole size and hole quality and unsurpassed machine flexibility. Specially designed for turbine and medical applications.
|
|
Machine Specifications |
|
Machine Specifications |
|
ST-300 |
|
Current EDM's ST300 EDM Drill enables precision deep-hole drilling of hard alloys to depths up to 300 times electrode diameter. Installed in hundreds of shops around the world, this unique system is capable of fast and accurate performance: Drilling a .040" hole through 1-inch tool steel in approximately 35 seconds, virtually burr-free. The ST300 can drill at all angles using electrodes ranging from .004" to .256" in diameter. |
|
KOCH |
|
Machine Tool |
|
Adding Value through Service. |